Plastgrommet Roll to Roll Pro

Roll2Roll

Roll2Roll

Automate time-consuming finishing tasks with a reduced footprint

Three different models to choose from depending on your specific finishing needs.

Workflow is key to moving jobs through your shop efficiently and out the door to your customers. Finishing is the bottleneck of print production and hiring and training staff takes time and can be expensive. The new Roll2Roll range automates time-consuming tasks as welding and eyeleting, with a reduced footprint.

Three different models to choose from depending on your specific finishing needs:

ROLL2ROLL WELDING	ROLL2ROLL EYELETING	ROLL2ROLL EYELETING PRO

Welding on both sides of the roll. Manual slitting.	Eyeleting on both sides of the roll. Manual slitting.	Eyeleting on both sides of the roll. Motorised traction gantry. Automatic slitting.

Roll2Roll WELDING

If you produce fence-mesh or banners on a roll, to weld 50 m or 100 m rolls is a difficult task for any print shop as rolls are heavy and difficult to handle.

Roll2Roll Welding automates the process of welding both sides of the roll simultaneously using hot air technology with low noise level compare with other systems.

If you are currently using pre-hemmed mesh, this product will offer a flexible finishing solution and you can upsell your jobs using webbing tape instead of hemming, offering a product with higher wind resistance.

Single flap keder is often welded using high-frequency technology, not the fastest process. Discover what productivity means with the special keder guide and keder dispenser.

WELDING

Three different welding options :

40 mm hem.
40 mm webbing tape.
Single flap keder.

Machine is supplied as standard with hemming guides, others are optional.

Machine incorporates a manual slitter to cut the material along the X axis (hem and webbing tape, not keder).

Technologies and Features

1. Pre-hemming guides | 2. Webbing tape dispenser | 3. Hot-air welder | 4. Manual slittier | 5. Keder dispenser (not shown in the picture)

Video here

Roll2Roll EYELETING

Eyeleting both sides of a roll is a time-consuming task if you do not have the correct equipment at your shop.

If you need to eyelet both sides because you have welded the roll with Roll2Roll Welding, you are using pre-hemmed media or you n0eed to finish single layer banners, Roll2Roll Eyeleting is the machine you have been looking for.

Automatic eyelet setting selecting distance between eyelets (this figure will be constant for the entire roll).

EYELETING

You can choose between two eyelet presses depending on your needs:

Evolution (Pneumatic eyelet press).
Autocross (Electric eyelet press).

Wheel encoder stops the machine at the correct spot for eyelet setting. Machine incorporates a manual slitter to cut the material along the X axis (hem and webbing tape, not keder).

Independent eyelet station

Automatic eyelet machine
Evolution | Autocross

Turn the machine over and use it independently (1). By making a 180º turn, the machine goes from being a line machine to being an independent eyelet station.

Support tray (2) for greater comfort.

By using the auxiliary foot pedal (3), you can operate the eyelet machine and work with ease to finish rolls or banners quickly.

Video Here

Technologies and Features

1. Eyelet press 1 (turning 180º) | 2. Eyelet press 2| 3. Manual slitter

Video Here

Roll2Roll EYELETING PRO

This machine has same features as Roll2Roll Eyeleting, incorporating a motorised traction gantry and an automatic slitting device.

Roll2Roll Eyeleting Pro offers great flexibility in terms of finishing as you can eyelet full rolls or eyelet banners cut to a certain length. Precise control of the eyelet and cutting position with the use of a servo motor.